Chemlon® 206 G
Chem Polymer Corporation - Polyamide 6

General Information
General  
Material Status
  • Commercial: Active
  • Availability
  • Europe
  • North America
  • Test Standards Available
  • ASTM
  • Filler/Reinforcement
  • Glass fiber reinforcement, 6.0 % Filler by Weight
  • Forms
  • Pellets
  • Processing Method
  • Injection Molding
  •  
    ASTM and ISO Properties 1
    Physical
    Nominal Value
    Unit
    Test Method
    Density -Specific Gravity
    1.18
    sp gr 23/23°C
    ASTM D792
    Mold Shrink, Linear-Flow
    0.0080 to 0.013
    in/in
    ASTM D955
    Mechanical
    Nominal Value
    Unit
    Test Method
    Tensile Strength
    13500
    psi
    ASTM D638
    Tensile Elongation @ Yld
    4.0
    %
    ASTM D638
    Tensile Elongation @ Brk
    5.0
    %
    ASTM D638
    Flexural Modulus
    480000
    psi
    ASTM D790
    Flexural Strength
    18500
    psi
    ASTM D790
    Impact
    Nominal Value
    Unit
    Test Method
    Notched Izod Impact (73 °F)
    1.00
    ft-lb/in
    ASTM D256
    Thermal
    Nominal Value
    Unit
    Test Method
    DTUL @264psi - Unannealed
    355
    °F
    ASTM D648
    Melting Point
    420
    °F
    DSC
    CLTE, Flow
    0.000031
    in/in/°F
    ASTM D696
    Electrical
    Nominal Value
    Unit
    Test Method
    Volume Resistivity
    1.0E+18
    ohm-cm
    ASTM D257
    Dielectric Strength (0.118 in)
    279
    V/mil
    ASTM D149
    Flammability
    Nominal Value
    Unit
    Test Method
    Flame Rating - UL (0.0319 in)
    HB
     
    UL 94
    Limiting Oxygen Index
    24
    %
    ASTM D2863
    UL 746
    Nominal Value
    Unit
    Test Method
    Comparative Tracking Index (CTI)
    600
    V
    UL 746
    Additional Properties

    Burn Rate, FMVSS-302: PASSES

     
    Processing Information
    Injection
    Nominal Value
    Unit
    Drying Temperature
    175
    °F
    Suggested Max Moisture
    0.20
    %
    Suggested Max Regrind
    25
    %
    Rear Temperature
    425 to 455
    °F
    Middle Temperature
    485 to 495
    °F
    Front Temperature
    485 to 510
    °F
    Nozzle Temperature
    485 to 510
    °F
    Processing (Melt) Temp
    480 to 510
    °F
     
    Notes
    1 Typical properties: these are not to be construed as specifications.
       
     

    Makes no representation or warranty of any kind, express or implied, with respect to this product, as to merchantability, Fitness for particular purpose or otherwise. The data listed represents average values and are believed to be reliable, They are given for information; no guarantee of their accuracy is made, however, and the product is sold upon condition that purchasers shall make their own test to determinate the characteristics of the product and the suitability of the product for their particular process.