MarFlex™ PE HHM TR-130
Chevron Phillips Chemical Co. - Polyethylene, High Density

General Information
General  
Material Status
  • Commercial: Active
    • Availability
  • Europe
  • North America
    		•  
  • Pacific Rim
  • South America
    • Test Standards Available
  • ASTM
    • Features
  • Food Contact Acceptable
  • Impact Resistance, Good
  • Tear Strength, Good
    • Uses
  • Bags
    • Agency Ratings
  • FDA Food Contact, Unspecified Rating
    • Forms
  • Pellets
    • Processing Method
  • Film, Blown
    •  
    ASTM and ISO Properties 1
    Physical
    Nominal Value
    Unit
    Test Method
    Density
    0.937
    g/cm³
    ASTM D1505
    Melt Mass-Flow Rate (MFR)     ASTM D1238
    (190°C/2.16 kg)
    0.300
    g/10 min
    		  
    (190°C/21.6 kg)
    20.0
    g/10 min
    		  
    Films
    Nominal Value
    Unit
    Test Method
    Film Thickness - Tested
    1.00
    mil
     
    Tensile Strength @ Yld MD  2
    3100
    psi
    ASTM D882
    Tensile Strength @ Yld TD  2
    3100
    psi
    ASTM D882
    Tensile Strength @ Brk MD  2
    6100
    psi
    ASTM D882
    Tensile Strength @ Brk TD  2
    6100
    psi
    ASTM D882
    Elongation @ Break MD  2
    500
    %
    ASTM D882
    Elongation @ Break TD  2
    600
    %
    ASTM D882
    Dart Drop Impact (1.00 mil) 3
    100
    gm
    ASTM D1709
    Elmendorf Tear Str MD  4
    50
    gm
    ASTM D1922
    Elmendorf Tear Str TD  4
    500
    gm
    ASTM D1922
     
    Notes
    1 Typical properties: these are not to be construed as specifications.
    2 2.0 in/min, 1.00 mil
    3 Method A
    4 1.00 mil
       
     

    Makes no representation or warranty of any kind, express or implied, with respect to this product, as to merchantability, Fitness for particular purpose or otherwise. The data listed represents average values and are believed to be reliable, They are given for information; no guarantee of their accuracy is made, however, and the product is sold upon condition that purchasers shall make their own test to determinate the characteristics of the product and the suitability of the product for their particular process.