SABIC® LLDPE M200024
Saudi Basic Industries Corporation (SABIC) - Polyethylene, Linear Low Density

General Information
General  
Material Status
  • Commercial: Active
    • Availability
  • Europe
    • Test Standards Available
  • ASTM
  • ISO
    • Features
  • Cycle (Production), Fast
  • ESCR, High (Stress Crack Resist.)
  • Flow, High
  • Food Contact Acceptable
    		•  
  • Gloss, High
  • Molecular Wt. Dist., Narrow
  • Toughness, Low Temperature
    • Uses
  • Automotive Applications
  • Blending
  • Containers
    		•  
  • Household Goods
  • Industrial Applications
  • Lids
    • Forms
  • Pellets
    • Processing Method
  • Blow Molding
  • Extrusion, Film
  • Injection Molding
    •  
    ASTM and ISO Properties 1
    Physical
    Nominal Value
    Unit
    Test Method
    Density
    0.924
    g/cm³
    ASTM D1505
    Density
    0.924
    g/cm³
    ISO 1183
    Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
    20.0
    g/10 min
    ASTM D1238
    Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
    20
    g/10 min
    ISO 1133
    Enviro. Stress Crack Res (Condition A, Compression Molded, F50, 100% Igepal)
    24.0
    hr
    ASTM D1693
    Mechanical
    Nominal Value
    Unit
    Test Method
    Tensile Modulus (Compression Molded)
    1% Secant: 45700
    psi
    ASTM D638
    Tensile Strength @ Yield (Compression Molded)
    1740
    psi
    ASTM D638
    Tensile Strength @ Break (Compression Molded)
    1230
    psi
    ASTM D638
    Tensile Elongation @ Brk (Compression Molded)
    450
    %
    ASTM D638
    Impact
    Nominal Value
    Unit
    Test Method
    Notched Izod Impact (Compression Molded)
    10.1
    ft-lb/in
    ASTM D256
    Hardness
    Nominal Value
    Unit
    Test Method
    Durometer Hardness (D Scale, Compression Molded)
    55
     
    ASTM D2240
    Thermal
    Nominal Value
    Unit
    Test Method
    Brittle Temperature
    -103
    °F
    ASTM D746
    Vicat Softening Point (Loading 1 (10 N))
    201
    °F
    ASTM D1525
     
    Processing Information
    Injection
    Nominal Value
    Unit
    Processing (Melt) Temp
    379 to 450
    °F
    Mold Temperature
    41.0 to 86.0
    °F
     
    Notes
    1 Typical properties: these are not to be construed as specifications.
       
     

    Makes no representation or warranty of any kind, express or implied, with respect to this product, as to merchantability, Fitness for particular purpose or otherwise. The data listed represents average values and are believed to be reliable, They are given for information; no guarantee of their accuracy is made, however, and the product is sold upon condition that purchasers shall make their own test to determinate the characteristics of the product and the suitability of the product for their particular process.