|
|
|
|
|
| MATERIAL | PRODUCT | SERIES | PROCESS | PROPERTIES |
| Polyethylene | DOW HDPE DMDA-8904 NT 7 | High Density | Injection | Caps, Buckets |
| DOW HDPE DMDA-8907 NT 7 | High Density | Injection | Buckets, Boxes | |
| DOW HDPE 12450N | High Density | Injection | General Use Flow 12 | |
| DOW HDPE DMDA-8920 NT 7 | High Density | Injection | High Flow | |
| MARLEX 9005 | High Density | Injection | High Impact | |
| MARLEX 9006 | High Density | Injection | Buckets | |
| DOWLEX IP40 | High Density | Injection | Thin wall | |
| Marlex® HHM 5502 | High Density | Blowing | General use containers | |
| Formolene® HB 5502A | High Density | Blowing | General use containers | |
| DOW HDPE DMDA 6200L | High Density | Blowing | General use containers | |
| UNIVAL™ DMDH-6400 NT 7 | High Density | Blowing | Juice, milk and water containers | |
| Formolene® HB6007 | High Density | Blowing | Juice, milk and water containers | |
| Formolene® E-924 | High Density | Extrusion | Film | |
| Marlex® HHM TR-480X | High Density | Extrusion | Piping | |
| MarFlex™ PE HHM TR-130 | High Density | Extrusion | Film | |
| Alathon® L 5005 | High Density | Extrusion | Film | |
| DOW LDPE 722 | Low Density | Injection | Lamination | |
| SUMITOMO L750 | Low Density | Injection | Lamination | |
| DOW LDPE 993I | Low Density | Injection | Injection | |
| DOW LDPE 503A | Low Density | Extrusion | Film | |
| DOW LDPE 132I | Low Density | Extrusion | Film | |
| DOW LDPE 133A | Low Density | Extrusion | Film | |
| Petrothene® GA 564-000 | Linear Low Density | Injection | ||
| Petrothene® GA 574-000 | Linear Low Density | Injection | ||
| SABIC® LLDPE M200024 | Linear Low Density | Injection | ||
| Formolene® L42022B | Linear Low Density | Extrusion | ||
| Formolene® L42009 | Linear Low Density | Extrusion | ||
| DOWLEX™ 2045 | Linear Low Density | Extrusion | ||
| DOWLEX 2553 | Linear Low Density | Extrusion | ||
| ATTANE™ 4203 | Ultra Low Density | Extrusion | Low Temperature | |
| AFFINITY™ PL 1880G | Ultra Low Density | Extrusion | Plastomer | |
| Promalene JD 2000 | Ultra Low Density | Extrusion | Impact Modifier | |
| PET | Cleartuf 8006 | Bottle Grade | Extrusion | |
| Polypropylene | Homopolymers | Injection | General Use Flow 12 | |
| PROMALENE PP 120 PW | Homopolymers | Injection | General Use Flow 12 | |
| Sunoco F120F | Homopolymers | Injection | General Use Flow 12 | |
| DOW H700-12 | Homopolymers | Injection | General Use Flow 12 | |
| Sunoco FP 200F | Homopolymers | Injection | General Use Flow 20 | |
| Sunoco FP 300F | Homopolymers | Injection | General Use Flow 35 | |
| Sunoco PP D040W6 | Homopolymers | Extrusion | Raffia | |
| Sunoco PP D180A2 | Homopolymers | Extrusion | Fiber | |
| FORMOLENE 2510 | Impact Copolymers | Injection | Flow 10 Injection | |
| FORMOLENE 2520 | Impact Copolymers | Injection | Flow 20 Injection | |
| FORMOLENE 2502 | Impact Copolymers | Blowing | ||
| SUNOCO TI4040WT | Impact Copolymers | Injection | Caps, Compression | |
| FORMOLENE 2306A | Impact Copolymers | Injection | Caps, Compression | |
| FORMOLENE 7302A | Random Copolymers | Blowing | ||
| SUNOCO TR 3120 | Random Copolymers | Injection | Injection | |
| SUNOCO TR 3350C | Random Copolymers | Injection | High Flow Injection | |
| EVA | EVA 2-18 | Extrusion | Foaming, Plating | |
| EVA 3-28 | Extrusion | Foaming, Plating | ||
| EVA 18-18 | Extrusion | Foaming, Plating | ||
© COPYRIGHT 2006 PROMAPLAST MEXICO | DESIGN:  |
|
 |
